By “old” I mean about ten years ago, which I suppose is an eternity in the wireless networking universe – many cheap wireless extenders still use this approach (to stay on the channel of the wireless router), but you can push the signal just as well with a mesh system without all the negative effects of channel interference.
But it’s not always about wireless repeaters, and it’s possible that you’ll have no choice but to set your access point to the same channel as other nearby wireless devices if the area is crowd. So let’s look at some of your options and ways to mitigate the potential negative effects of multiple nearby access points sharing the same channel.
What happens if you have two or more access points on the same channel?
When two or more access points are using the same channel, even though their ranges overlap, there will be some degree of job function email list interference, depending on how close the access points are to each other. And I suspect that two main things can happen in this situation.
Engenius-ecs2512fp-ethernet-switch
The most common consequence is co-channel interference, which essentially creates a line where each device has to wait its turn. In addition to adding latency when data is being transmitt fairly quickly,
Do my access points if a client device takes longer to 20% more leads transmit data, it will further slow down data transmission between all access points in the same area. Another type of interference is more sinister and is call adjacent channel congestion.
Yeah, I know, I know, adjacent channel
Congestion doesn’t happen when multiple APs are using the same channel, it happens when they’re using overlapping channels. But I still mention it because there are very few non-overlapping channels, and overlapping ones are more likely to have a lot of people on them. So why is adjacent channel congestion one of the taiwan lead worst things that can happen to a Wi-Fi connection? Well, unlike co-channel interference, there’s no interaction between the APs, just dropp packets and maybe even a connection reset (unless it just hangs indefinitely). That’s why you should always aim for non-overlapping channels.